Группа ВКонтакте
RC Sailboat Surmount (UK Warehouse)
SKU: HB-F-01
3769 г
Описание
RC Sailboat-Surmount
A beautifully crafted R/C sailboat, fully built and ready to run.
All required items are installed, including mainsail winch, steering servo and all rigging, sail and hardware. All you need to do is add your own receiver and battery!
Boat hull is based entirely on an ocean going racing yacht and moulded in fibreglass with a perfect gelcoat and enamel painted finish.
Don't be mistaken in thinking these boats are slow and boaring. In a stiff breeze they can be extremely quick and perform turns rapidly, proving to be very exciting.
All required items are installed, including mainsail winch, steering servo and all rigging, sail and hardware. All you need to do is add your own receiver and battery!
Boat hull is based entirely on an ocean going racing yacht and moulded in fibreglass with a perfect gelcoat and enamel painted finish.
Don't be mistaken in thinking these boats are slow and boaring. In a stiff breeze they can be extremely quick and perform turns rapidly, proving to be very exciting.
Spec.
Length : 800mm
Height : 1520mm
Weight : 1.4kg
Area of Sails : 0.25m2
Ballast weight: 1.3kg
Draft from the waterline to bottom of keel: 300mm
Rig Height from the deck to the top of the mast: 1110mm
Required.
Radio System (2ch)
Receiver battery.
Radio System (2ch)
Receiver battery.
Note: Please ensure you fill the keel ballast to 1.2kg or heavier. Lead shot, bearings or bolts/nuts will be sufficient. Keeping them in place with epoxy.
Length: 800mm
Height: 1520mm
Weight: 1.4kg
Area of Sails: 0.25m2
Ballast weight: 1.3kg
Required.Radio System (2ch)Receiver battery.Note: Please ensure you fill the keel ballast to 1.2kg or heavier. Lead shot, bearings or bolts/nuts will be sufficient. Keeping them in place with epoxy.
Draft from the waterline to bottom of keel: 300mmRig Height from the deck to the top of the mast