Kingduino Fio ATmega328P Microcontroller

Описание

The Arduino Fio is a microcontroller board based on the ATmega328P runs at 3.3V and 8 MHz. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. It has connections for a Lithium Polymer battery and includes a charge circuit over USB. An XBee socket is available on the bottom of the board.
 
The Arduino Fio is intended for wireless applications. The user can upload sketches with an a FTDI cable or breakout board. Additionally, by using a modified USB-to-XBee adaptor such as XBee Explorer USB, the user can upload sketches wirelessly. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires.

Specs:
Microcontroller: ATmega328P
Operating Voltage: 3.3V
Input Voltage: 3.35~12V
Input Voltage for Charge: 3.7~7V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (of which 2 KB used by bootloader)
SRAM: 2KB
EEPROM: 1KB
Clock Speed: 8MHz
Dimensions: 65x28x12mm
Weight: 8.2g

*Note: This is not an original Arduino brand product.

Microcontroller: ATmega328P
Operating Voltage: 3.3V
Input Voltage: 3.35~12V
Input Voltage for Charge: 3.7~7V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (of which 2 KB used by bootloader)
SRAM: 2KB
EEPROM: 1KB
Clock Speed: 8MHz
Dimensions: 65x28x12mm
Weight: 8.2g