Группа ВКонтакте
LED Red, Green, Blue (RGB) Strip 50cm w/Flying Lead
Описание
These LED strips contain 30 RGB (Red,Green, Blue) LEDs.
The LED strip may be cut to fit into installations if necessary. Cutting marks are printed on the strip and must be adhered to. The smallest workable segment of the single color strip is 50mm long and contains 3 top Surface Mount LEDs.
During soldering, do not exceed a maximum soldering temperature of 260 Celsius degrees and the soldering time of 10 seconds. Solder connection should only be performed on designated solder pads on the strip.
There is a double-sided adhesive tape attached to the back of the strips. Care must be taken to provide a clean and dry mounting surface when mounting the strips.
This strip is not waterproof.
The LED strip may be cut to fit into installations if necessary. Cutting marks are printed on the strip and must be adhered to. The smallest workable segment of the single color strip is 50mm long and contains 3 top Surface Mount LEDs.
During soldering, do not exceed a maximum soldering temperature of 260 Celsius degrees and the soldering time of 10 seconds. Solder connection should only be performed on designated solder pads on the strip.
There is a double-sided adhesive tape attached to the back of the strips. Care must be taken to provide a clean and dry mounting surface when mounting the strips.
This strip is not waterproof.
Specs:
• 30 RGB LEDs
• Pre-cut to 50cm length
• Supplied with 4 terminal plug & Fly lead
• CE and RoHS compliant
Requires:
12volt power source
Specs: • 30 RGB LEDs• Pre-cut to 50cm length• Supplied with 4 terminal plug & Fly lead • CE and RoHS compliantRequires