Свежие скидки, купоны, новинки в наших каналах:
Группа ВКонтакте
RC Ocean Going Racing Yacht 2.2m (US Warehouse)
SKU: HB-F-05
3810 г
Описание
RC Ocean Going Racing Yacht 2.2m
With it's huge sail and bright colours this is a very striking and fast R/C Yacht.
All required items are installed, including mainsail winch, steering servo and all rigging, sail and hardware. All you need to do is add your own receiver and battery!
Boat hull is based entirely on an ocean going racing yacht and moulded in fibreglass with a perfect gelcoat and enamel painted finish.
Don't be mistaken in thinking these boats are slow and boaring. In a stiff breeze they can be extremely quick and perform turns rapidly, proving to be very exciting.
With it's huge sail and bright colours this is a very striking and fast R/C Yacht.
All required items are installed, including mainsail winch, steering servo and all rigging, sail and hardware. All you need to do is add your own receiver and battery!
Boat hull is based entirely on an ocean going racing yacht and moulded in fibreglass with a perfect gelcoat and enamel painted finish.
Don't be mistaken in thinking these boats are slow and boaring. In a stiff breeze they can be extremely quick and perform turns rapidly, proving to be very exciting.
Spec.
Length : 1000mm
Height : 2200mm
Weight : 3565g
Area of Sails : 0.52m2
Ballast weight: 1.3kg
Water depth: 50cm+
Draft from the waterline to bottom of keel: 400mm
Rig Height from the deck to the top of the mast: 1110mm
Rig Height from the deck to the top of the mast: 1110mm
Required.
Radio System (2ch)
Receiver battery.
Radio System (2ch)
Receiver battery.
Note: Please ensure you fill the keel ballast to 1.3kg or heavier. Lead shot, bearings or bolts/nuts will be sufficient. Keeping them in place with epoxy.
Water depth: 50cm+
Spec.Length: 1000mm
Height: 2200mm
Weight: 3565g
Area of Sails: 0.52m2
Ballast weight: 1.3kgWater depth
Required.Radio System (2ch)Receiver battery.Note: Please ensure you fill the keel ballast to 1.3kg or heavier. Lead shot, bearings or bolts/nuts will be sufficient. Keeping them in place with epoxy.
Draft from the waterline to bottom of keel: 400mmRig Height from the deck to the top of the mast
Динамика наличия
Динамика цен
Свежие скидки, купоны, новинки в наших каналах: