Athena Electric Warmliner Sailplane Balsa Composite 1480mm (PNF)

Описание

Plug and fly isn't just for foamies anymore. The Athena electric sailplane is a high performance, high quality airframe with all the electronics pre-installed. Designed to be a competition level sailplane for the discerning pilot with little time to build.

This model oozes performance and quality. The Athena has a carbon fiber fuselage molded in epoxy resin, not cheap polyesters. The built up wing and tail feathers are made of the highest quality balsa available. Covering those surfaces is premium Oracover plastic film covering. The wing arrives as two pieces, just needing to be joined with some epoxy to make it 1 piece. Pushrods feature ball link ends for maximum precision and zero slop. Even the control horns are airfoiled to further reduce drag. With such a nice model, it was screaming for good components so we have outfitted the Athena with digital metal gear servos, with the high power brushless motor spinning a carbon fiber folding propeller attached to an aluminum spinner. The blade yoke on the Athena is a twisted style which is designed to allow the propeller blades to fold flatter against the fuselage reducing drag significantly compared to a traditional straight yoke.

Flying the Athena is a treat. The slop free control system and rigid construction yields crisp response and on rails flight precision. The low weight, and sleek construction means it climbs to altitude fast and thermals with ease. This a great airplane for those wanting performance, but not wanting to spend a lot of time in the workshop. The Athena is a great model for ALES competition since it climbs quickly and thermals well.

Features:
• Plug and Fly - Just add radio sytem, battery and fly!
• Carbonfiber fuselage molded with epoxy resin
• Built up balsawood wing and tail feathers
• Wings and Tail covered in high quality Oracover film
• Pre-installed digital metal gear servos
• Carbon fiber folding propeller and aluminum spinner with twisted yoke
• Pre-installed high power motor and esc system
• Ball link pushrod ends are precise and slop free
• Airfoiled control horns

Specs:
Wingspan: 1480mm
Length: 877mm
Weight: 700g
Motor: 3045 1080kv Brushless Inrunner
ESC: 30A
Prop: 9x5 Folding Carbon
Airfoil: MH43

Required:
4 Channel Transmitter and Receiver
3S 11.1V 1300~1800mAh

*Note* The fuselage is all carbon fiber so it is suggested to use a receiver with a long antenna which can be run outside of the fuselage. This is to prevent any radio interference.