Группа ВКонтакте
Turnigy Talon Quadcopter (V2.0) Carbon Fiber Frame 550mm (RU Warehouse)
Описание
The Turnigy Talon V2 Quadcopter frame is a crafted from high quality genuine carbon fiber offering both great looks and performance. Our engineers set out to create a Quadcopter frame without compromise, several materials were tested and rejected until they decided that only genuine carbon fiber would meet the goals we had set out to achieve. Every component was weighed and measured shaving mere grams where possible to achieve a light weight yet extremely rigid frame. We didn't allow any compromises and neither should you.
Our team took the already popular Talon frame and studied the design, based on feed back from the multi-rotor community and our own ideas we redesigned the motor mounting plates allowing for top or bottom mounting of 28 and 35 size brushless outrunner motors (see photos for reference of different mounting options). The improved clamping system alone underwent 3 redesigns until our engineers were satisfied that the perfect strength and weight saving combination had been achieved. The center frame clamping system was almost doubled in size to ensure a strong brace on each boom. We stress tested the design until a 5kg load could be held on the center plate with minimal flex from each boom. Every aspect of this frame was thoroughly examined and thought through.
All this attention to detail has resulted in the elegant simplicity that is the Talon V2, A Quad frame that we are as proud to put our name behind as you will be to own.
We also offer a full line of quality multi-rotor electronics such as multi-rotor control board, ESC, motors and more, so there is no need to compromise on your electronics setup either!
Specs:
Weight: 280g (w/out electronics)
Width: 550mm
Motor Bolt Holes: 16/19/25mm
Requires:
28-XX or 35-XX brushless outrunner motor x 4
18~25A brushless ESC x 4
Multi-rotor control board
2200~3000mAh 11.1V lipoly
TX & RX
Динамика наличия
Динамика цен
Комбо-товары
Следующие товары можно купить с комбо-скидкой, если положить их в корзину вместе с Turnigy Talon Quadcopter (V2.0) Carbon Fiber Frame 550mm (RU Warehouse). Будьте внимательны: на эти товары может действовать более выгодная бадди-скидка или промо-скидка.SKU: T2200.3S.35 | Turnigy 2200mAh 3S 35C Lipo Pack (RU Warehouse) 247 г |
SKU: T2200.3S.20 | Turnigy 2200mAh 3S 20C Lipo Pack (RU Warehouse) 248 г |
SKU: Z22003S-40 | ZIPPY Flightmax 2200mAh 3S1P 40C (RU Warehouse) 262 г |
SKU: NTM2826-1100 | NTM Prop Drive Series 28-26 1100kv / 252w (RU Warehouse) 80 г |
SKU: 9171000446-0 | Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA (RU Warehouse) 40 г |
SKU: T2200.3S.25 | Turnigy 2200mAh 3S 25C Lipo Pack (RU Warehouse) 227 г |
SKU: 9171000268 | HobbyKing KK2.1HC Multi-Rotor Hard Case Flight Control Board With Remote Programmer (RU Warehouse) 120 г |
SKU: T2200.3S.30 | Turnigy 2200mAh 3S 30C Lipo Pack (RU Warehouse) 255 г |
SKU: D2826-62200 | Turnigy D2826-6 2200kv Outrunner Motor (RU Warehouse) 83 г |
SKU: 9045000001-0 | MT2213-935KV MultiStar Motor and Propeller Combo 10x4.5 CW/CCW (RU Warehouse) 169 г |
SKU: IMAXB6 | IMAX B6 50W 5A Charger/Discharger 1-6 Cells (GENUINE) (RU Warehouse) 465 г |
SKU: SK3-2826-1240 | Turnigy Aerodrive SK3 - 2826-1240kv Brushless Outrunner Motor (RU Warehouse) 116 г |
SKU: 9192000117-0 | Turnigy Multistar 2814-700Kv 14Pole Multi-Rotor Outrunner (RU Warehouse) 180 г |
SKU: 9171000011 | HobbyKing Multi-Rotor Control Board V3.0 (Atmega328 PA) (RU Warehouse) 99 г |