Team BlackSheep TBS Dominator Rx 5.8GHz 5G8

This 5.8 receiver module is made specially for the Fatshark Dominators. Featuring custom, high-sensitivity 5.8 GHz receiver modules compatible with all 5.8 GHz systems sold to date. More specifically transmitters sold by HobbyKing, Foxtech, etc and out-of-the-box systems such as the SpyHawk FPV are supported, as well as all Airwave-compatible transmitters (e.g. ImmersionRC).

Note: compatibility with Airwave is provided, but the quality will not be desireable. We suggest the use of BOSCAM video transmitters. For instructions and supported frequencies please see: http://team-blacksheep.com/products/product:110

Contents

• 5.8 GHz TBS Fatshark Dominator Receiver
• 5.8 GHz 5dbi RHCP Patch Antenna - designed by IBCrazy

Quick Intructions

Place the module into your Fatshark Dominator receiver. Toggle channel UP/DOWN within 1 second on the goggles to scan through all 40 channels for valid video signals. Toggle between bands by pushing (and holding) the golden button. The receiver will display the currently active band with the LED.

• 1 flash = BOSCAM Band A
• 2 flashes = BOSCAM Band B
• 3 flashes = BOSCAM Band E
• 4 flashes = Airwave
• 5 flashes = Race band

Specifications

• 40 channels (5 Bands with 8 channels each)
• -90dBm sensitivity
• Works with all BOSCAM A/V transmitters (200mW, 400mW, 500mW)
• Works with Airwave transmitters (tested with the new ImmersionRC 600mW). Airwave frequency support is not full spec. Range is affected, as well as transmission picture quality! We highly recommend the use of BOSCAM transmitters.
• 3 - 5V operating voltage
• RP-SMA antenna connector
• Fatshark Dominator compatible, toggles channels using the Fatshark button!
• Can be installed into Fatshark Attitude goggles!

Supported Frequencies

Band A: Team BlackSheep, RangeVideo, SpyHawk, FlyCamOne USA
Band B: FlyCamOne Europe
Band E: HobbyKing, Foxtech, etc
Airwave: ImmersionRC, Iftron

Downloads

Manual