Holybro Kopis Mini DJI Version 148.6mm F7 4S 3 Inch FPV Racing Drone w/ DJI Air Unit

Specification: ( Manual )
Brand Name: Holybro
Model: Kopis Mini
Version: With DJI Air Unit / Without DJI Air Unit ( Optional)

Frame: 3mm 3k carbon fiber

Flight Controller: Kakute F7 HDV

ESC: Tekko32 F3 4in1 45A mini ESC

VTX: DJI FPV Air Unit ( Optional)

Motor: F1507 KV3800

Propeller: T3140

Buzzer included.

Battery plug: XT30

Wheelbase: 148.6mm

Weight:198g (included DJI air unit)

Recommend battery: 650mah~1300mah 4S ( NOT Included)

olybro Kakute F7 V1.5 Flight Controller ( More Details)	MCU: STM32F745 32-bit processor ( Manual) IMU: MPU6000 (SPI) Barometer: BMP280 Current Sensor: Approximately 130 amps maximum measurable value USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART) 6 hardware UARTS (UART1,2,3,4,6,7) All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without “uninvert hack”. Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported. TF card for Blackbox logging Dimensions: 35x41x7mm (includes foam-mounted gyro board in height) Mounting Holes: Standard 30.5mm square to center of holes Weight: 8g
Tekko32 F3 4in1 45A mini ESC ( More Details)	Brand Name: Holybro Model: Tekko32 F3 45A Item Name: 45A BLheli_32 3-6S 4 in 1 ESC Con. Current: 45A Peak Current: 50A - F3 MCU, runs double faster than F051 - 32bit ESC with BLHELI32 firmware - Supports 3-6S lipo input -PWM input, TLM supported - Voltage output (VBAT) - NO BEC - Supports oneshot / Multishot / Dshot PWM - Supports damped light - Ext. cap needed for 6s (470uf 35v for 6s usage.) - Mounting holes M2, 20x20mm - Size:30 x 36 mm - Weight: 7.8g
T-Motor F1507 3800KV Motor ( More Details)	Brand Name: T-Motor Model: F1507 KV: 3800KV Input Voltage: ( Lipo) 3-4S Configuration: 12N14P Shaft Diameter: 2mm Idle Current ( 5V): 0.9A Peak Current (60s): 23A Max. Power: 372W Internal Resistance: 81mΩ Lead: 24#AWG 100mm Dimension: 18.9x29.7mm Weight: 15g ( Include Cable)
DJI Air Unit	Brand Name: DJI DESCRIPTION Weight : Air Unit (Camera included): 45.8 g / 3.9 g (MMCX elbow each) Dimensions Air Unit: 44 x 37.8 x 14.4 mm Camera: 27.4 x 21.1 x 20.1 mm Coaxial Cable: 100 mm Operating Frequency: 5.725-5.850 GHz Transmitter Power (EIRP): FCC/SRRC: <30 dBm; CE: <14 dBm Low Latency Mode (720p/120fps): <28 ms High-Quality Mode (720p/60fps): <40 ms Max. Transmission Distance: FCC/SRRC: <4 km; CE: <0.7 km Video Format: MP4 (Video format: H.264; Audio format: ACC-LC) I/O Interface: USB-C, MMCX, 3-in-1 port, microSD card slot Operating Temperature Range: 32° to 104°F (0° to 40°C) Input Power: 7.4-17.6 V, about 4-9 W Sensor: 1/3.2'' CMOS; Effective Pixels: 4 M Lens: 2.1 mm, f/2.1 Shutter: Rolling shutter ISO: 100-25600 FOV: 150°(D); 122°(H); 93°(V) Dimension: 22.1 x 21.1 x 20.1 mm Weight: 8.2 g CHANNELS Channels Info :8CH