Свежие скидки, купоны, новинки в наших каналах:

Тинивупы

RC FPV зимой

Коптеры

FPV

Вертолёты

Аппаратура радиоуправления

Самолёты, авиамодели, летающие крылья

Зарядные устройства

Аккумуляторные батареи

Группа ВКонтакте

iFlight Alpha A85 4K Caddx Loris

Коптеры → Тинивупы → Синевупы → iFlight Alpha A85 4K Caddx Loris

Product Description

Let's welcome the iFlight Alpha series, a new way to fly FPV. Ever wanted to have a 4K Cam on the smallest possible whoop size quad? We sticked the caddx Loris 4K to one of our new 2inch whoop frames, did some tuning and tried to find the optimal ratio between weight and power. This is what we came up with to combine flight time efficiency with sufficient power.

Features：

76 grams (without battery)
Butter smooth XING-E 1204 (more torque and efficiency with longer flight times compared to 1105 motors)
Ducts to protect the sensitive environment or yourself
Pre-tuned with smooth cinematic settings
iFlight Sigma 5.8G light antenna upgrade (included)
iFlight Sigma 900mhz light micro antenna upgrade (included with every Crossfire Nano RX)

Alpha A85 w/Caddx Loris 4K Camera BNF Specs:

SucceX-D 20A Whoop F4 AIO Board
XING-E 1204 FPV Micro Motor
Wheelbase: 85mm
Body size: 125*125mm
Ducted propeller size: 2 inch
FC pattern: 25.5*25.5mm
FPV cam spacing: 14mm
Weight: 76.5g (without battery)
Flight time: 5-7 min cruising (4S 450mAh)

FACTORY SETUP and WIRING DIAGRAM:

This BNF comes pre-built and setup with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some Betaflight tweaks to enhance the flight experience.

Reflashed your drone but didn't backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

Alpha A85 w/Caddx Loris 4K Camera Quad BNF Included Components and Parts

Prebuilt and tested Quadcopter
1x Alpha 85mm Frame
1x Caddx Loris 4K Camera
1x 5.8G SucceX Micro Force VTX 300mW
1x iFlight Sigma 5.8g light antenna
2sets HQ 2 inch 4-blades (Set of 4 - Color May Vary)
1x iFlight Lipo Strap

FC // SucceX-D 20A F4 Whoop AIO

*Size：30.5*30.5mm

*Mounting pattern：25.5*25.5mm/φ3mm

*Connector：Micro-USB

*MCU：STM32F411

*Gyro：MPU6000

*Blackbox：8MB

*BEC output：5V 2A/10V 2A

*INA pad：UART2 (nR2)

*Barometer：no

*Constant current：20A，25A（Burst）

*Input：2-5S

*Current sensor：yes

*BLHeli：BLHeli-S

*ESC Telemetry：no

*Target：IFLIGHT_F411_PRO

*ESC Firmware：G-H-30 BLS

Additional Suggested Parts

DJI HD FPV Goggles
Radio Controller
Battery 4S 450mAh

Important

The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.