Flycolor X-Tower 2 F722 + 60 4in1 ESC

Main features

ESC

• MCU:STM32F051 ,ARM 32-bit Cortex MCU, frequency up to 48 MHZ. 
• MOSFET with high performance and low Rds , not afraid of large current, more suitable for rapid flight. 
• ESC firmware: Flycolor_X_Cross_BL_32. 
• Two layers tower structure between 4in1 ESC and FC,using cable for quick connection, using silicone vibration absorber for supporting, reducing the effect of vibration on Flight Control.
• Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling. 
• The code supports regular 1-2ms pulse width input, as well as Oneshot125 , Oneshot42 and Multishot . 
• All Dshot and Proshot signals are supported.

Flight Control 

• FC firmware:STM32F7X2（Config.:FLYCOLORF7） 
• FC board:FLYCOLORF7. 
• MCU:STM32F722. 
• Gyro：MPU-6000 SPI.
• Bluetooth：FC_Bluetooth.
• USB: Type C.
• Supports SBUS,SPEKTRUM1024/2048 etc. remote control / receiving mode.
• FC integrated 3.3V,5V, 12V for receiver, VTX, camera, buzzer, LED and other peripheral devices. 
• 4-way led port, independent 5V BEC power supply, making the power supply more safe and reliable.
• Supports Betaflight Configurator to adjust the LED color. 
• Install holes:30.5x30.5mm,M3.

Includes

• 32Bit 4in1 ESC x 1 
• F7 Flight Control x 1 
• Silicone vibration absorber x 8
• LED wire x 4
• Assemble screw M3×22 x 4
• O-Ring x 5
• ESC /FC connecting wire (2x10p SH1.0) ×1
• Power wire(XT60) x 1
• Electrolytic capacitor x 1

*To enhance performance of filtering, users can solder the electrolytic capacitor which are included in the accessory pack to the positive and negative terminals.