GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included).

Vertical and horizontal TBS Crossfire antenna mounts included to cover you and your antenna dead ends.

Features:

- 6mm rigid arm design for more stiffness

- Top- and bottom battery mount option

- XING 2806.5 efficient wide stator motors

- GPS pre-installed for more safety at distance

- TPU Bottom Stand for Gopro Camera (Camera and Camera Mount are NOT included)

- 360° TPU protection, DJI cam protection and antenna mounts

- DJI FPV Air Unit, buttery-smooth 720p120fps FPV feed (TPU soft mounted)

- No props in view (DJI Air unit record in 1080p/60fps)

- Battery voltage LED status light (illuminated IF logo on the bottom)

Specification:

Brand Name: iFlight

Model: Chimera7

Item Name: 320mm F7 6S 7 Inch Long Range FPV Racing Drone

Drone Wheelbase: 320mm

Optional Receiver Version: BNF-DJI ( Built-in DJI Receiver)

TBS Crossfire Nano RX ( Built-in DJI Receiver & External TBS Crossfire Nano Receiver)

Weight: 628.1 ( without Battery)

Flight Time: 17-19 Mins ( Take Example as 6S 4500mAh Lipo)

Chimera7 320mm Frame Kit	Wheelbase: 320mm Main body dimension: 285*199mm Bottom to top distance: 20mm Arm thickness: 6mm Bottom plate thickness: 3mm Top plate thickness: 2mm Upper(middle) plate thickness: 3mm Camera plate thickness: 3mm (included TPU inserts)
SucceX-D F7 V2.1 TwinG Flight Controller	MCU: 216MHz STM32F722 Gyroscope: 2x ICM20689 Barometer: YES Blackbox: 32MB Betaflight OSD: YES BEC: 5V 2.5A / 9V 2.5A Current sensor scale: 100 Inverter for SBUS input (UART2-RX) Smartaudio & Tramp VTX protocol supported Beeper pad: Yes RSSI input pad: No UARTs: 5 Motor outputs: 8 8 pin 4in1 ESC port (GND, VBAT, M1, M2, M3, M4, CUR, R5) 6 pin DJI Air Unit port (R1, GND, R2, T2, GND, 9V) BLHeli32 Telemetry：RX5 Input voltage: recommended 2-6S, MAX 8S Firmware Target: IFLIGHT_F722_TWING Mounting pattern: 30.5*30.5mm φ4mm with Grommets φ3mm Dimensions: 36x36mm Weight: 7.5g USB type-C
SucceX 50A BLHeli_32 4in1 ESC	MCU: STM32F051 Up tp 48kHz PWM frequency Capacitance: 470uF/50V Current Sensor: Yes Input: 2-6S LIPO Constant: 50A / Burst: 60A BlHeli32 telemetry: Yes BEC: No Supports up to Dshot1200, Proshot, Oneshot, Multishot Target: iFlight-BL32-4IN1 Weight: 14.4g Size: 43x39mm (including the power pads) Mounting Hole: 30.5x30.5mm/Φ3mm
XING 2806.5 1300KV Motor	Voltage: 2-6S KV: 1300KV Configuration: 12N14P Bearing: NMB 1155 Stator Diameter: 28 Stator Length: 6.5mm Shaft Diameter: M5 No.of Cells(Lipo): 2-6S Weight: 49.5g(with a short cable) Motor mount hole: 19x19 φ3mm
Gemfan 7040 3-Blade Propeller	Quantity: 2 CW & 2 CCW Color may vary
DJI Air Unit HD Digital System & Camera	Weight : Air Unit (Camera included): 45.8 g / 3.9 g (MMCX elbow each) Dimensions Air Unit: 44 x 37.8 x 14.4 mm Camera: 27.4 x 21.1 x 20.1 mm Coaxial Cable: 100 mm
Optional Receiver Version	BNF-DJI Version: Built-in DJI Receiver ( On DJI Air Unit Module); this version is compatible with DJI Remote Controller. TBS Crossfire Nano RX Version: Built-in DJI Receiver and has a external TBS Crossfire Nano RX; this version is compatible with DJI Remote Controller and Official TBS Radio Transmitter
Lipo Battery ( NOT Included)	Recommend 5S 3000mAh above (slow cruising) or 6S 2500mAh above

Package Included:

1x Chimera7 Drone

1x TPU bottom stand incl. lock screw ( for Installing TPU Camera Mount)

1x DJI FPV Camera ( Built Well on Drone)

1x DJI FPV Air Unit Module ( Built Well on Drone)

2x 5.8G Albatross RP-SMA Antenna LHCP 150mm

2x Gemfan 7040 Propeller CW

2x Gemfan 7040 Propeller CCW

4x 20x250mm PU Leather Battery Strap (Color May Vary)

iFlight TITAN Chimera7 LR 320mm SucceX-D F7 V2.1 50A BL_32 ESC 6S 7 Inch Long Range FPV Racing Drone BNF w/ 2806.5 1300KV Motor DJI Air Unit HD Digital System