Very cheap but equipped with high-performance and stable components. The frame is formed by high-precision TPU 3D printing, fixed with carbon fiber board and the use of integral foam to prevent collision. Every FPV pilots could enjoy the fun of building their own FPV Cinewhoop.

Pre-Ordered products, in stock after 2020.12.28

Features:

No Solder work need and easy to build

Very reliable and resistant to drops

Stable and smooth flying

ready fixed mount compatible for Insta360

Smooth and powerful

Diversity SPI Receiver compatible Frsky/S-FHSS/Redpine protocol

Specifications：

Brand Name: Happymodel
Item Name: Cine8

Wheelbase: 85mm
Size: 145mmx140mmx23mm

Weight: 73g(without battery)

Weight: 99g(with Insta360)

Receiver option:

Internal SPI Frsky version (Compatible with Frsky ACCST D8/D16, S-FHSS, Redpine)

External Flysky Fli14+ receiver version(Compatible with Flysky AFHDS-2A protocol radio)

External Speki+ receiver version(Compatible with Spektrum DSM2/DSMX protocol radio)

External TBS Crossfire Nano receiver version

Package includes:

Item Name	Qty
Cine8 Frame	1
Option1: CrazybeeF4 V3.1 SPI Receiver version compatible FrskyD8/D16 S-FHSS	1
Option2: CrazybeeF4 V3.1 with External Fli14+ receiver
Option3: CrazybeeF4 V3.1 with External DSMX receiver
Option4: CrazybeeF4 V3.1 with External TBS crossfire nano receiver
Happymodel EX1202.5 KV8000 brushless motor	4
Gemfan D51(2020-4) Cinewhoop Props	1
Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera	1
5.8G 25mw~400mw Whoop_VTX_HP	1
TypeC USB Adapter	1
Tattu 3S 11.4V 450mah battery	1

*Insta360 go is not include.

Motor	Mode: EX1202.5 KV8000 Configu-ration:9N12P Stator Diamter:12mm Stator Length:2.5mm Shaft Diameter:Φ1.5mm Motor Dimension(Dia.Len):Φ14mm14.5mm Weight(g):4.4g No.of Cells(Lipo):2-3S
Propellers	Material:PC Weight:0.91g Pitch:2in Props Dia:50.3mm Center Thickness:4.5mm Center Hole Dia:1.5mm 3 holes
Flight controller	(Frsky SPI RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR (S-FHSS SPI RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR (Redpine SPI RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR (External Flysky Fli14+ RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR (External Speki+ RX version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR (External TBS CRSF NANO version) CRAZYBEEF4 V3.1 FC Firmware target: CrazybeeF4FR MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 2-4S battery input (DC 2.9V-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5V 1A BEC
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 2-4S LiPo/LiPo HV (7v/17v) Current: 12A continuous peak 15A (5 seconds) Support BLHeliSuite programmable Factory firmware: F_H_40_REV16_8.HEX Default protocol: DSHOT600
Onboard Frsky SPI D8 receiver Version	CC2500 Hardware Compatible with FrskyD FrskyX Frsky_X_LBT SFHSS REDPINE protocol Channels: 8ch Failsafe support Diversity 2.4G receiver system No ground interference: above 300meter
External Flysky Fli14+ receiver	Channel: 14 Protocol: AFHDS-2A 2.4G Mode: The second generation of an enhanced version of the automatic FM digital system Antenna Length: 50mm (single antenna) Input Power: 4.0-6.5V DC Weight: Only 1g Size: 19.5mm12mm5mm Color: Black Signal Output: IBUS RSSI Output: Channel14 No ground interference: >500m
External Speki+ receiver	Dimension: 20mm12.4mm5mm Support protocol: DSM2/DSMX Output Signal configuration: SRXL(Set Spektrum2048/SRXL for the serial receiver provider) Antenna connector: I-PEX MHF3 Antenna length: 70mm Input voltage: 3.6v~13v Input current: 100ma Channels: Max12ch(usually channel 12 is used for RSSI)
External TBS CRSF Nano receiver	Original TBS CROSSFIRE Receiver ,CRSF Protocol , Official TBS transmitter compatible
5.8G 400mw VTX	Output power: 25mw~400mw switchable Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 400mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band SmartAudio ready
Caddx ANT 1200tvl camera	Image Sensor: 1/3" CMOS Sensor Horizontal Resolution: 1200 TVL TV System: NTSC or PAL IMAGE: 16:9 or 4:3 Synchronization: Internal Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000 S/N Ratio : >52dB (AGC OFF) Video Output: CVBS Lens: 1.8mm Min. Illumination: 0.001Lux@F1.2 Auto Gain Control: YES BLC: YES WDR: Global WDR DNR: 3D DNR Dimensions: 1414mm(with bracket to 1919mm) Wide Power Input: DC 3.7-18V Work Temperature: -20℃~+60℃ Weight: 2g (N.W.)

Цены на Happymodel CINE8 85mm Cinewhoop BNF SPI Frsky D8 в магазинах

Найдено предложений: 48 (MakerFire¹, AliExpress¹)

Магазин	Остаток на складе	Цена лота	Цена доставки	Купон / промокод	Количество в лоте	Цена за единицу
MakerFire	Нет на складе	₽8257 $106		КУПОН MKF5	1	₽7867 $101
AliExpress	На складе много	₽10828 $118		КУПОН $79-$1	1	₽10736 $117