Diatone MAMBA Basic F722 MINI MK3 + F40_BLS 40A 6S

Item Name: MAMBA Stack F722 MINI MK3 40A 6S 8BIT ESC

Flight Controller:

MAMBA Basic F722MINI MK3
MCU: 216MHz STM32F722RET6
GYRO: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6 Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED
S/F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 2.5A
MOUNTING: 20mm, M2

ESC:
MAMBA F40_BLS MINI
INPUT VOLTAGE: 2~6S Lipo (8.4V~25V)
CONTINUE CURRENT: 40A×4
BURST CURRENT: 45A (10S)
BEC: No
Target：BLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
MOUNTING: 20mm, M3/M2

Features:

Fixed

Add I2C function

When you connect the USB, the receiver and OSD settings can be saved

Increase the pad area

LED signal selection （when Mamba Led sys avaiable）

BEC short circuit protection

TVS instant high voltage protection 30V

Update

Upgrade the anti-interference cable

Use Typec（Most）

The pad area of the Mini flight controller (20×20) increased by 140%

Added

Add self-recovery insurance to the receiver's 5V power supply.

Increase the camera VCC power supply pad.

The standard flight controller (30.5×30.5) adds a spare pad.

Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference.

Package Included:

1 x MAMBA Stack Basic F722 MINI MK3 40A 6S 8BIT
1 x High-Frequency 470uF/35V
2 x 8pin sh1.0
2 x 16AWG 60mm
AMASS Original XT60