iFlight SucceX 60A V2.1 Plus 8S BLHeli_32 4in1

The SucceX 60A Plus V2 32bit BL Dshot 1200 4in1 ESC was designed to give your motors smooth power with great stability and durability. The 32bit 48mHz 3-IN 1 STM32F051  MCU, Metal MOSFET, TDK MLCC Low ESR ceramic capacitors provide high efficiency and better heat dissipation.

Standard 30.5*30.5 Φ3mm  mounting holes; Vibration and impact can be perfectly avoided by adding dampers; Rational layout design with extended solder pads ensures easy fixes or adjustments; Countersunk holes on the soldering pad enable each layer board can be powered.

Excellent hardware, optimized circuit, and high-performance components enable SucceX 60A V2 Plus 4in1 ESC to respond efficiently. All in all, it brings faster-responding speed and smoother flying experience!

Features:

- 8 layers single-board stacking PCB board;

- 4oz 1.6mm thick power board(0.9mm copper ratio),better operating load capacity;

- 32bit FO51K86 MCU,48mHz running speed;

- TDK MLCC Low ESR ceramic capacitors;

- Top grade metal MOSFET;

- Rational layout, countersunk holes on extended motor soldering pad enable each layer board can be powered.

Specification:

- Dimension:43x39mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 14.3g

- Supports 2-6S lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 32.X Firmware

- Current sensor: Yes

- BEC: No

- Supports: DShot DShot150/300/600/1200/MultiShot/ OneShot etc.

- Target: iFlight-BL32-4 in 1

RECOMMENDATION:

- No additional capacitor needed up to 5S!

- But to encounter back EMF and ensure the longevity of your electronics, min. 220uF Cap 35V for 4-5S, 50V for 6S on your main lead!

Package Included:

- SucceX 60A V2.1 4-in-1 ESC  * 1pc

- Power cables & ESC signal wires * 1set