Emax BabyHawk R 136mm PNP

Specification:
Brand Name: EMAX
Model: Babyhawk R 3 Inch 
Item Name: 136mm Wheelbase F3 Magnum 5.8G FPV Racing Drone
Material of Frame: Carbon Fiber
Wheelbase: 136mm
Arm Thickness: 3mm
Net Weight: 85.4g ( PNP)

Flight Controller & ESC : Emax F3 Magnum FC & 12A 4 In 1 ESC mini Flytower
Motor: Emax RS1106 4500KV Brushless Motor
Propller: EMAX AVAN Mini 3024 3 Inch Propeller
VTX: 5.8G 40CH 25/200mW Switchable VTX
Camera: Micro CCD Camera
Version: PNP Version ( Without Receiver)
               BNF Version ( With Emax Tiny Receiver, compatible with Frsky D8 Mode )
Lipo Battery: Support 3S / 4S Lipo Input


Emax F3 Magnum FC & 12A 4 In 1 ESC mini Flytower
Tower Height: 19mm
Tower Net Weight: 8.65g
Mounting Hole: 20x20mm

F3 Flight Controller	Firmware	Omnibus F3 Betaflight Target
	MCU	STM32F303
	Accelerometer/Gyro	MPU6000 ( Connected via SPI )
	OSD	Built-in betaflight OSD
	Buzzer	On-Board
	BEC	Integrated with 5V@ 3A BEC output
	LED Pad	Addressable
	Avaliable Receiver Type	PPM/SBUS/Spektrum DSM
	Size	24x24mm; 20x20mm (M2) Mounting Hole
	Net Weight	3.32g

12A BL_S 4 In 1 ESC	Con. Current	12A
	Burst Curren	15A (10S)
	Support Voltage	3-4S Lipo
	Firmware	BLheli_S
	MCU	EFM8BB21F16G , 50mhz
	Choic of Protocol	DShot up to 600, Multishot, Oneshot125
	PCB Board	30z High TG PCB Board
	Size	24x25mm ; 20x20mm ( M2 ) Mounting Hole
	Net Weight	4.40g

Features:

 

 

Package Included:
1x Emax Babyhawk R 136MM Frame
4x Emax RS1106 4500KV Motor
1x F3 Magnum F3 Flight Controller
1x 12A BLheli_S 4 In 1 ESC
4x EMAX AVAN Mini 3 Inch Propeller
1x Emax Receiver ( Only BNF Version has)
1x Camera
1x 5.8G 40CH 25/200mW VTX