Flyduino KISS 25A 5S

- 32-Bit-ARM Cortex M4 MCU @ 80 MHz

- Telemetry capability (voltage, current, temperature, rpm)

- Overcurrent protection (measures the current and reduces it to max 40A)

- Over-temperature protection (reduces the max power if hotter then 100°C)

- sinHybrid :: Sinwave/BackEMF Hybrid mutation for smoother running.)

- Dshot 2400 (Full resolution of 2000 steps takes only 6.5μs).

- Supports all common Dshot commands like turtle mode, 3D mode, and rotation direction change.

- Expanded adaptive auto timing (7.5-30° advance on each commutation),

- For Race Multicopters (25A continuous also with weak cooling), High max. RPM (500.000ERpm, 71.400Rpm with a 14Pole Motor

- Accurate RPM control (2000 steps using Dshot)

- No additional capacitor needed for 3-5S.

- Very fast throttle response, Linear throttle response, Active freewheeling (low diode losses)

- Regenerative braking

- Dshot 100-2400, Oneshot42, Oneshot125 and (25 - 500 Hz) PWM get autodetected.

- Supports FrSky Sbus, Graupner SumD, TBS CROSSFIRE, and Multiplex SRXL, S-Port, Graupner HOTT,
                  TBS CROSSFIRE, and Sensorbus.

- 600000 ERPM maximum rotation field speed (usage up to 500000 recommended)

- 6 Layer 70µm copper PCB where almost all of the layers can be used for the current as the logic parts sit on a separate PCB

- All in and outputs are protected against over (~30V) and under voltage(~-30V) but are still 3,3 and 5V compatible

- Modern smart gate driver. gate driver