XILO Phreak

This is the XILO Phreak 5" FPV Racing Quadcopter RTF. Fully built, tuned and ready to fly out of the box. Simply add your own radio, battery, and bind the included receiver and go fly! This Phreak RTF features quality components like the XILO 2207 Motors, XILO Robin Camera, TX5GS VTX, Lumenier AXII antenna, and XILO Stax ESC and FC.

Each RTF is hand-built, flown, and tuned individually to give you the best experience possible flying your drone.

Maybe you just don't have time to build a quad from scratch or maybe you don't feel comfortable with all the specifics in setting up a drone. In any case, GetFPV's handbuilt RTF's will do the job - and more!

About the Airframe

The XILO Phreak FPV Racing Quadcopter is a stretched X, durable, finely tuned airframe designed for FPV racing.

The Phreak features high-quality 3k carbon that can take a beating. We know that racing frames take a lot of punishment so you want a quad that is easy to repair and work on, and won't cost an arm and a leg. Each 4mm arm and plates are CNC milled out of a solid sheet of high-quality XILO carbon fiber. The outer weave of the carbon fiber runs 100% down each arm of the XILO Phreak (0/90 weave), maximizing the strength of the carbon and arms. The center layers are offset at 45 degrees providing even and balanced strength throughout the entire plate.

The airframe features removable 4mm carbon fiber arms and 2mm thick top and bottom plates. The arms are sandwiched between the bottom plate and 2mm battery plate giving you an incredible 8mm thick of carbon fiber at the center of the body. Each arm is secured in place with just 2 screws and a steel press fit nuts in the main plate. This allows you to swap an arm by simply taking out 1 screw and loosening the other, pulling the arm out of the slot. It is very fast and easy to work on!

This RTF has been fully built and test flown for you, so you can simply bind your radio and go! Our professional build team takes the guesswork out of building and tuning for you by pre-programming the flight controller settings and using only high-quality XILO motors, ESCs, and FPV gear.

Note: Current RTF's are being built with 5" arms. Additional arm sizes should be available in the future.

Features

• RTF fully built and test flown by our technicians at our Florida facility.
• Pre-tuned with XILO racing settings
• Full 3K Carbon Fiber airframe
• Easy arm swaps - swap arms by removing only 1 screw!
• Ultra-durable 8mm of carbon at center of frame
• Equipped with POPO Pro motors and props
• Black and blue XILO color scheme - from spacers and props to vibration grommets.
• Compact size for 5" propellers, 210mm motor to motor.
• Black Oxide steel screws
• Easy grip blue anodized spacers
• "Bumpers" on the end of the arms to protect the motor during a crash
• Lightweight and rigid

Weight

• Airframe: 86g (airframe + hardware)
• AUW: The XILO Phreak FPV Racing Quadcopter RTF has an AUW of 300g (excluding battery)

RTF Included Components and Parts

A fully built and tested XILO Phreak FPV Racing Quadcopter

• 1x XILO Phreak FPV Racing Quadcopter - 5"
• 1x XILO Medium Lipo Strap - 16x250mm
• 1x RunCam Robin XILO Edition - 700TVL 4:3 Micro FPV Camera (2.1mm)
  
• 2x Lumenier 5x5.3x3 - Gate Breaker Propeller (Set of 4 - Transparent Blue)
  
• 1x Lumenier TX5GS 25-200-500mW 5.8GHz FPV Transmitter w/ BFCMS Control (MMCX)
• 4x XILO POPO Pro 2207 2550KV Motor
  
• 1x XILO Stax Combo - F4 Flight Controller + 45A BLHeli_32 6s 4-in-1 ESC
• 1x Lumenier AXII MMCX 5.8GHz Antenna (RHCP)
• 1x FrSky R-XSR 2.4GHz 16CH ACCST Micro Receiver w/ S-Bus & CPPM or Spektrum Quad Race Serial Receiver w/ Telemetry

Additional Suggested Parts (not included in the RTF)

• Lipo: XILO 1300mAh 4s 100c (recommended) or XILO 1300mAh 5s 100c (advanced)
• FPV Goggles
• Midrange: Eachine EV200D Diversity HD FPV Goggles
• Premium: Fat Shark Dominator HDO FPV Goggles
• HD Action Camera: GoPro Hero5 Session or GoPro HERO7 Black
• Radio Transmitter: FrSky X9D Plus or DX8 Gen 2 DSMX® 8-Channel Transmitter

Videos