- Amp/Volt monitoring port allows flight controller to monitor the voltage & amperage in real time (on condition that the Flight Controller supports the function).

- EMF8BB2 chip with an operating frequency of 48MHz for great performance.

- BLHeli-S open source program supports firmware update or ESC programming via throttle signal wire and all the functions of BLHeli-S.

- Damped light mode for rapider motor response.

- Regular PWM throttle mode, OneShot125 throttle mode, OneShot42 throttle mode, and MultiShot throttle mode are supported.

- Dshot150/300/600 digital throttle mode is supported.

- ESC supports a throttle signal of up to 621Hz in regular throttle mode and is compatible with various flight controllers.

XRotor Nano F4 Flight Controller Mini F4 Flight Controller

Specification: ( Manual)

Brand Name: Hobbywing

Model: XRotor for Nano F4

Item Name: Omnibus F4 Flight Controller Integrated with OSD BEC

Firmware Version: OMNIBUSF4SD

MCU: STM32 F405

Accelerometer & Gyro: MPU6000

- With onboard OSD, controlled by F4 MCU

BEC: 5V @ 1A

Mounting Hole: 20x20mm

Size: 27x27mm

Weight: 3.3g

- Voltage Monitor: Supported

- Current Monitor: Supported

- External Buzzer: Supported

- LED Controll: Supported

- USB Port: MicroUSB

- flight controller Programming: Suppored

- Programming Via: Betaflight / Cleanflight-Configurator

Compatibel with ( Modes): PWM, Oneshot125, Oneshot42, Multishot, DShot150, DShot300

DShot600, DShot1200 and Proshot1000

Compatible with ( Transmitter): PPM, for Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF, SRXL

Application: 130mm & below FPVs

Features:

-Onboard OSD microchip which supports the DMA mode allows users to adjust its parameters via

the Betaflight software. (Note: the OSD is controlled by the F4 MCU.)

-The flight controller which supports Betaflight firmware & allows parameter adjustment via Betaflight software

is more applicable to FPV race.

-TF-card which can record and save more flightack box data allows users to adjust the setup of

their aircraft easily.

- Compatible with various receivers like SBUS, SUMH, SUMD, for SPEKTRUM1024/2048, XBUS, PPM

and etc.

- LED strip signal output port allows users to adjust the color & flash mode of the LED strip via the flight controller.

- Volt/Amp monitoring port allows users to check the battery voltage ( VBAT+ port ) and current

( CRT port ) (extra current meter is needed).

- Buzzer output port allows users to connect external buzzer(s) to the flight controller for warning or informing

the flight status of the aircraft.

- Micro USB port allows users to connect the flight controller to a PC to flash firmware and adjust parameters.

TB2s40_dJLO8KJjSZPcXXaV0FXa_!!2206811492 TB2lqFTkwnH8KJjSspcXXb3QFXa_!!2206811492 HTB1Tj62msjI8KJjSsppxh4byVXaB HTB1mhkueqLN8KJjSZFGxh6jrVXaW 001 002 003 004 005 006