T-Motor F4 + F45A V2 4in1

T-Motor's well-designed F4 Flight Controller combined with the F45A V2 3-6s BLHeli32 4-in-1 ESC will give you optimized performance - using the included 10pin cable for solderless installation and ultra-low stack height.

F4 Flight Controller

The T-Motor F4 Flight Controller comes with an LC filter, which is great for eliminating interference to your VTX or other equipment. Equipped with a 5V/2A BEC allows hooking up of receivers, cameras, and other 5v compatible gear. The F4 is also loaded with 6 UARTs. Moreover, the user also has the choice of two gyros - the ICM20602 for high refresh rates or the MPU6000.

Specifications

• Input Voltage: 2-8S (8.4-33.6V)
• MCU: STM32F405RGT6
• IMU: ICM20602
• OSD: Yes
• Blackbox: 16MB Onboard Flash
• UARTs: 6
• ESC Connections: 6
• Firmware: BetaFlight Target: T-MOTOR F4
• BEC: 5V 2A
• LC Filter: Yes
• Current Sensor: Esc Telemetry / Current ADC
• Buzzer: Pads
• Barometer: No
• Dimensions: 37x37x7mm
• Mounting Pattern: 30.5x30.5mm
• Weight: 7g

F45A V2 BLHeli_32 4-In-1 ESC

This ESC is T-Motor's 4-in-1 version of their popular F45A ESC. This 4-in-1 ESC packs 45A into an industrialized PCB layout made with premium features such as a 32bit main control chip, BLHeli_32 firmware, and 6s support. 

The F45A 4-in-1 comes with a heatsink attached to keep heat away from sensitive electronics.

Another small bonus is the 4 x motor wire PCBs that come with this ESC. These go on your quad arms and help prevent damage to your motor wires from prop strikes or other damage. A neat little touch to include them. 

Features

• 32bit Main Control Chip: Compared with traditional MCU of 8 bit, 32bit stm32f051 main control chip enjoys the advantage of fast computing speed and multiple functions.
• Fast Response Speed: Prompt and accurate response on throttle signal receiving for the euphoria from zero lag operation.
• Original BLHeli_32 Firmware: Original BLHeli_32 firmware with powerful performance and diverse functions capable of ESC parameter setting and firmware upgrading makes the ESC far more reliable and efficient.

Specifications

• Model No: F45A 6S 4IN1 32bit 
• Con. Current: 4*45A 
• Peak Current (10S): 4*53A
• Lipo: 3-6S
• Weight: 18g
• Size: 49 x 40 x 6.9mm

Includes

• 1 x T-Motor F4 30x30 Flight Controller
• 1 x T-Motor F45A V2.0 3-6S 4-in-1 ESC
• 4 x Damping Rubbers
• 4 x Motor Wire PCB
• 2 x 8pin wiring harness (1x 70mm, 1x 30mm)
• 1 x XT60 Lead
• 1  x 35v 470uf Capacitor