Jumper T12

The Jumper T12 brings the best features of the T8SG v2 series and bundles them together with JumperTX an open source Firmware set based on the OpenTX Project. Compatible with JR style RF modules the T12 comes with the JP4-in-1 Multiprotocol module as standard.

Use the same radio for all your quads! Either use the included JP4-in-1 module that supports nearly every RC protocol out there or use another JR style module like the Crossfire with out-of-the-box support!

A serious contender in the budget radio category!

You asked, we listened.

One of the most asked questions when the T8SG v2 was released was will it work with TBS Crossfire. We are happy to announce the T12 version does indeed support Crossfire and in CRSF mode with LUA script support and most importantly WITHOUT any hardware modification for end users. If your looking for the most compact, most affordable and most EPIC Crossfire compatible TX in the market today look no further than the Jumper T12. Jumper is committed to supporting OPEN hardware module platforms and will never try to force customers on to proprietary equipment.

Keep it simple, keep it affordable.
The T12 platform is shipped with the JP4-in-1 Multi-protocol module. If you already own JR Modules such as the TBS Crossfire or any other JR Module compatible 2.4ghz, Analogue or Long Range UHF system the T12 is ready to rock out with its socket out! A standard LCD screen was used along with the T8SG V2 butter smooth V2 gimbals offering quality, usability and best of all affordability.els

Goodies included
The T12 comes standard with a neck strap, AA battery tray, and 18650 battery tray. The T12 can also be powered with any LiPO or LiFE battery of a compatible size meaning users do not need to source their own uncommon sized Li-ion round cells.

Seamless Integration
The T12, when paired with the Jumper JP4-in-1 offers seamless integration between JumperTX (an open source Firmware set based on the OpenTX Project) and module meaning protocols can be accessed and selected directly from the software GUI. Crossfire users can set up their equipment via LUA scripts.

Features

• JumperTX (open source Firmware set based on the OpenTX Project)
• JR/FrSKY compatible module bay on the rear side
• USB online firmware upgrade
• Ultra-low power consumption, longer battery life
• Channels: up to 16 channel output
• Open Source Firmware, all channels are fully programmable
• Wide voltage input (2s lipo recommended)
• Multilingual menu
• Vibration reminder function
• Support telemetry (depending on the receiver)
• Crossfire CSRF Compatible: Yes
• LUA Script support: Yes

Specifications

• Radio MCU: STM32F205VET6 (512kb)
• Size: 158 * 150 * 58
• Weight: 342g (without battery)
• Working voltage: DC5-DC9V (factory with 4 * AA battery box, 2s Lipo recommended, batteries not included)
• Firmware: JumperTX (an open source Firmware set based on the OpenTX Project)
• Channels: up to 16 channel output
• Display: 1.7-inch LCD display, 128* 64 resolution
• Gimbal Type: Potentiometer
  
• JR/FrSKY compatible module bay on the rear side
• Upgrade method: USB online upgrade
• Simulator mode: 3.5mm standard ppm output or USB HID
• Voice support: YES

Jumper JP4-in-1 Module

The Jumper JP4IN1 Module features the CC2500, NRF24L01, A7105, and CYRF6936 RF Chip modules all integrated on one board. This module can convert standard PPM signals form module equipped radios into the RF protocols used by most radios in the market today (See RF Chip data below). This module is plug and play with module equipped radios in the FrSKY series and requires no complex wiring or “hacking” to get running. The module is a great way to improve the enjoyment of your flying experience, using a better radio such as the FrSKY Taranis series rather than the low-grade radios commonly included with most kits offers a night and day difference in performance. The Jumper JP4IN1 module is also upgradable via USB input

Specifications

• Working voltage: 6-9v
• Working current: <=100ma
• Operating frequency: 2.4G ISM band
• RF power: +22DBM
• Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
• Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna)
• Net Weight: 42g (including antenna)
• Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
• Firmware updatable: Yes, via USB.

RF Chip Data

• Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
• Texas Instruments CC2500: FrSky, Futaba SFHSS
• Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
• Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN, and most other Chinese models

Jumper Open Source Repository

• https://github.com/JumperXYZ

Includes

• 1x Jumper T12 Radio Transmitter
• 1x RF 4-in-1 Module
• 1x Antenna
• 1x AA Battery Tray
• 1x 18650 Battery Tray
• 1x Neck Strap
• 1x USB Cable