ZHISHUAI 180X Carbon Frame Drone (Kit)

Описание

ZHISHUAI 180X Carbon Frame Drone (Kit)

The Zhishuai 180X is a unique drone frame with a high, enclosed, FPV camera section up front. 

It comes with 3, machined, 3K carbon fiber decks of which only the main deck (3mm) goes the full length of the drone (it also contains the arms in a billet design). At the front, there is the higher upper (camera) deck (2mm) which encloses the FPV camera in a complete carbon fiber frame. Behind the camera deck is another deck (1.6mm) which is about half as high as the camera deck under which all your electronics is stored. The camera deck also mounts an adjustable FPV camera mount. 

There are four ABS plastic landing legs that also surround the motors to give that extra protection if you have a bumpy landing. At the back is a mounting bracket for the video transmitter aerial.

All you need is to add your running gear to the frame and you are ready to take the Zhishuai to the air and watch it perform.

Features:
• 3mm 3K Carbon Fiber Billet lower deck
• Adjustable FPV camera mount
• Low Center of Gravity
• ABS landing legs
• Suitable for 4” propellers

Specs:
Wheelbase: 180mm
Weight: 115g

Includes:
1 x Frame Kit
1 x Battery strap
1 x XT60 battery connector with leads
3 x Camera ring mounts
1 x Manual

Required:
4 x Motor 1806/2204/2205
4 x ESC 10~30A
4 x Propellers 4040 / 4045
1 x Flight Controller CC3D / NAZE32 / SP RacingF3 30.5 Mounting.
1 x Power distribution board
1 x 3~4S (11.1~14.8V) 1500~2600mAh LiPoly Battery
1 x 4~6 Channel Radio Tx / Rx
1 x FPV and Video (optional)