HobbyKing™ Lil3Der Fun Fly Balsa 1016mm (ARF)

Описание

The HobbyKing™ Lil3Der is a classically styled fun fly model that is both docile and agile, depending on the setup. The large square wing and light weight gives excellent low speed handling while large control surfaces means you can throw the Lil3Der around with minimal effort. We have optimized this design to give a light control feel.

The Lil3Der arrives almost ready to fly, just needing an evening or two worth of build time to complete. The all built up balsa and plywood airframe is strong where it needs to be, but overall very light. It has proven to be a durable model, taking the knocks of flying it low and slow. The elevator servo is mounted in the aft fuselage providing a short, direct linkage. To help centralize the weight, the rudder is mounted under the removable canopy/hatch, utilizing pull-pull cables for a precise, low drag setup. A complete hardware package with all control horns, cables, control rods, CA hinges, plastic wheel pants, wheels, and landing gear is included.

In addition to the large wing area for excellent low speed handling, the Lil3Der also has a broad CG range. This means you can set it up with low control throws and a conservative CG for a docile aerobatic trainer, or crank up the controls and make it as wild as you want. With good throttle management, it will fly for 10+ minutes, even on a 1300mah pack. One of the greatest things about the Lil3Der is the light roll control feel. The ailerons remain completely effective, even at the lowest of airspeed.

The HobbyKing™ Lil3Der is a fast building, fun to fly airplane that will surely be a hit at the field!

Features:
• Almost ready to fly - Add your choice of electronics and power plant then complete final assembly!
• Light weight balsa and plywood airframe
• Aluminum landing gear with plastic wheel pants
• Large wing area and overall low weight
• Magnetically secured battery access hatch
• Pull pull rudder cables gives precise control, with less weight in tail
• Great fun fly plane that handles wind well, but shines in calm conditions
• Broad CG range to suit a variety of pilots.

Specs:
Wingspan: 1016mm
Length: 924mm
Wing Area: 27.3 dm2
Flying Weight: 650g

Required:
4 Channel Transmitter and Receiver
2217 1100kv Outrunner Motor
20A ESC w/BEC
3S 11.1V 1300~1500mAh Lipoly Battery
4 x 9g Servo
10x4.7 prop
Thin CA
Medium CA