Extra 330S 3D Aerobatic Sport Balsa GP/EP 1350mm (ARF) (AU Warehouse)

Описание

This stunning Extra 330S is a superbly finished mid-size model that has been designed very much with extreme 3D aerobatic's in mind. The airframe combines a very low flying weight with generous control surfaces to give the RC pilot precise control and amazing performance.

As well as featuring a high quality airframe, this Extra 330S really looks the part courtesy of it's fantastic colour scheme which has been achieved with quality covering that has been expertly applied. The all balsa and plywood airframe arrives with a 1 piece wing helping to keep the weight low. For ultimate precision the tail servos are mounted in the aft fuselage keeping the pushrods very short and direct. Rugged aluminum landing gear, a fiberglass cowl, and wheel pants dress up the model while a complete hardware package rounds it out. Arriving as an almost ready to fly configuration, a few hours work completing final assembly and installing all your electronics is all that is needed. Depending on your preference, you can set the Extra 330S up for either nitro, or electric power.

Flying the Extra 330S is a treat. With the extreme light weight of the model yet ample power on tap, extreme 3D is all within your grasp. The low wing loading means you can harrier it at a walking pace just on the edge of a stall, then pour on the power and do waterfalls, blenders, or whatever other manuevers you can think of.

Features:
• Almost ready to fly - complete final assembly and install your choice of electronics
• Super light weight balsa and plywood airframe
• Attractive multi-color plastic film covering
• Rugged aluminum landing gear
• Fiberglass cowl and wheel pants
• Tail mounted servos for short, direct pushrod connections
• Large control surfaces and low wing loading provide superior 3D ability
• For nitro or electric power

Specs:
Wingspan: 1350mm
Length: 1180mm
Airframe Weight: 1200g

Required:
4 Channel Transmitter and Receiver
.32~.46 2-cycle glow engine
4255 Motor
4 X Standard size high torque servos
1 x mini servo (nitro version)
4S 14.8V 3300mah Lipoly Battery
80A Brushless ESC
4.8~6.0v receiver battery (nitro version)

Download the manual here